How to enter bisskey or patch on the following decoders

How To Manually entering
BISS keys on Strong
4955, 4955B, 4955G &
4962i

-Track the satellite
package that hosts the
channel you want to
open with the BISS key

-Tune to the channel that
you want to open with a
biss key
Now,

-Get to the patch
by inputting F1 + 8280
on your remote control
from your idle screen.

-The patch menu window
will pop up instantly.
Navigate to BISS Key
Patch Menu as shown
from the picture above
Now, Scroll to the last
Key Number and Press
Green button to add
another Keyline. I always
go for the “EDIT” option. I
will recommend same to
beginners
If you would rather edit
an existing key, Press
on “Sat” to edit the
Frequency, Symbol Rate
and Version of the TV3
BISS key.
Your provider ID can be
“1FFF” and you can
leave your index as “00”
or “3D” or any two digits.
Ensure that The Key Data
doesn’t exceed 16
characters such as 11 11
11 33 11 11 11 33
Press SAT Key button
from the remote control
to enter the Frequency,
Symbol rate and
Polarization. Make sure it
appears as follows: Freq:
SR: Pol:SID =
12525:30000:V:0077
Press the OK button on
your remote to save the
key data. Then exit.

Manually entering biss keys on
Tiger star T245+ Ultra

1. Click menu-click
installation, then click
Patch – Scroll to BISS
2. Next, scroll through the
existing keys and pick
one. I will recommend
you pick the last one or
any irrelevant one.
3. After that, go to blue
button Edit by clicking it,
then enter your keys on
the Key column. Don’t
forget to enter 00 on
Prov ID and Index. Then
Click (F1) Edit Boss to
enter your your frequency
and symbol Rate, you
will find H automatically.
4. Save and After exit.

Manually entering
BISS keys on GSky
decoders

N.B: Users of Gsky and hellobox
decoders don’t need to manually
enter any Biss keys at the
moment. Just download the
latest software and watch the
decoder do its magic.
You must first download
and install the latest
software for your version
of GSky decoder from
the manufacturer’s
website.
Nex, press menu on your
remote and open
“conditional “
Scroll to BISS
Once this has been
opened, press the green
button on your remote to
add a new BISS key.
Edit the keys accordingly.
[11/21, 1:41 PM] Noah: Manually entering
BISS keys on Qsat

1. Firstly, press menu on
the remote control.
2. Next, enter default code
which is usually “0000”
unless if changed by you,
then you can enter your
own code.
3. Navigate to the Xcam set
up on your decoder. It is
usually under settings
4. However, If Xcam set up
is not available or
hidden, simply press
1512 on the remote
control and Xcam set up
will pop up automatically.
Please note that before
you press 1512, make
sure you are in the area
of your decoder where
you see things like
“Preference, AV, Ethernet
Config, PVR Config,
Multimedia setting etc.

Manually entering
BISS keys on other
strong decoders
To input BISS keys in Strong
products such as SRT 4669XII,
SRT 4669X, SRT 4920, SRT
4923, SRT 4922a, SRT 4950,
SRT 4950M, SRT 4950H,
complete the following steps.

1. To start with, press
8280 on your remote
control and a new screen
will pop up.
2. However, if after
pressing, a new screen
fails to show up, you
have to activate the biss
key option first. At this
point, press 6969 on your
remote control and you
will be asked for a
password, simply press
6969 again on your
remote control. After that
press 8280 to enter the
biss key menu.
3. On the other hand, if the
biss key option has been
activated on your
decoder already, then
you don’t need to go
through such a long
process. Simply follow
this simple steps below:
– Select the channel you want
to open.
– Press 8280 on your remote
and press OK.
– The Biss Key menu will
display.
– Enter your Key
– Press Exit to save the setting.

Manually entering
BISS keys on
AlphaBox X4 and x6
decoders

* Press the menu button on
your remote control.
* Locate the settings
* On the setting Bar, enter 2778
* The access control option will
display
* Click OK on the Access
Control
* Locate CONSTANT.CW Edit
and press OK
* Input your biss key
( CAID:SERVICE ID: BISS KEY ).
[11/21, 1:50 PM] Noah: Manually entering
BISS keys on other
decoders

1. For SUPERMAX 91001: Press
the menu key. Then press 7799
code for the biss key.

2. As for TECHOSAT 2000
ULTRA 1: Simply press menu
button and press 5400.

3. If you own a STARSAT 9700
& 7979: Simply press menu
keys on your remote control,
then press 9999 for the biss key.

4. Similarly, for STARSAT 2000
HD ACE : Press f1 on your
remote control, then press 333
and the biss key menu will open.

5. Furthermore, SAMTEL 7000
HD: Simply press OK button,
then press “0” and enter your
biss key.

6. Moreso, EL 7999 HD is not
left out: Press on Menu button
on your remote control, then
press “7777′ four times on your
remote control and enter your
biss key.

9. Users of ECHO STAR
DECODERS should follow this
process:
– Press menu on your remote
control.
– Select system settings
– Press the red button on your
control
–Now, Enter 2528
– Enter your keys.
– Press the Red button twice.
– Finally, press OK.