*HOW TO SOLVE REPEATED OTA UPGRADING*

* Remove your signal cable

* Allow your decoder to finish loading

* Press menus on your remote

* Scroll to personal setting

* Then self installation

* Pointing

* Scroll to frequency and enter 11481, Symbol rate 45000, Pol: V

* Scroll to Force OTA and ON it

* Then connect back your signal cable

* Press back on your remote then press Ok to save.

It will take you to where you will click on software upgrade 

* Scroll to transponder and use your side button to search for 11481

*  then press Ok

*After upgrading, repeat the procedure To scan for channels*

* Press menu

* Personal setting

* Self installation

* Pointing

* Enter frequency: 11481, symbol rate: 45000, Pol: V

Turn On your Force OTA

* Press back

* Scroll to channel Scan

* Press Ok.

[25/10, 6:37 pm] +234 703 346 3480: Yes what you need to do after the upgrading , if you want the channels that is on the second TP (11606)  follow these steps 

* first go to menu 

* Scroll down to Installation setup, press ok 

* then scroll down to main tp, press ok

* when it has displayed your main tp you will press the blue button on your remote to search

* before it scans to 83% or 84% remove the satellite cable from the back of the Decoder when it scans finish put the satellite cable back

If you don't understand let me know