How to Install Digital Channels on HD+ Decoder

1. Download the new software

by rebooting the HD+ Decoder, or Scan manually from "Check for new software" option in service manu in Settings.

2. After download and reboot, on the welcome page, the STB will scan for the Digital Channels.

Requirements for the Installation of the Digital Channels:

- 90cm dish + LNB.

- 60cm dish + LNB with Noise

  Figure NOT ABOVE 0.1 dB.

- Signal Quality of at least 80%

NOTES:

- The Scan for the Digital Channels is automatically performed once after the new Software is downloaded.

- The STB of users having 60cm dish + LNB with Noise Figure ABOVE 0 .1 dB would not get the Digital Channels.

- You would see the Scanned Digital Channels ONLY  in the ALL CHANNELS list.

3. To confirm if installation can detect digital channels. Go To:

- Settings -> Channel Search ->

  Automatic Channel Search ->

  Start Scan. Or

- Settings -> Channel Search ->

  Manual Scan. Enter:

- Frequency: 12654

- Polarity: V

- Symbol Rate: 32700

- Start Scan

* The Digital Channels would be found in ALL CHANNELS list